Related products
-
Rode Audio
Rode Boompole Metal 3M
0 out of 5(0)Rode’s Boompole provides up to 10′ of extension for shotgun microphones. The pole uses a 3/8″ industry-standard thread and is designed to fit SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic. The five-section pole collapses down to 33″ for easy portability.
- 5 Sections
- Five sections adjust the length of the boom between 33″ and 10′ (84cm – 3 m).
- 3/8″ Thread
- The boom uses an industry-standard 3/8″ thread, and mates with most shockmounts and stands.
- Compatible With…
- SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic.
SKU: 09011912,500 EGP -
Rode accessories, Rode Audio
Rode NT2-A Large-diaphragm Condenser Microphone
0 out of 5(0)- For Vocals and Instruments
- Cardioid, Omni & Figure-8 Polar Patterns
- Pad Switch at -5 or -10 dB
- High-Pass Filter at 40 or 80 Hz
- Shockmount Inhibits Vibration Noise
- Large 1″ Gold-Sputtered Diaphragm
- Transformerless Output Stage
- Pop Filter Controls Vocal Plosives
- XLR Cable for Hookup to Mic Preamp
- Operates on 24 or 48 VDC Phantom Power
SKU: 09013129,000 EGP -
Rode Audio, Rode XLR Microphones
Rode NTG5 Shotgun Microphone Kit with
0 out of 5(0)- For Indie Films, TV & Documentaries
- Lightweight NTG5 Short Shotgun Mic
- K-Tek Boompole with Internal Cable
- Shockmount and Furry Windshield
- Phantom Powered
- Moisture-Resistant for Humid Conditions
- Compact, Lightweight Housing
SKU: 09011341,000 EGP -
Rode Audio, Rode XLR Microphones
Rode NTG1 Condenser Shotgun Microphone
0 out of 5(0)- For Indie Films, TV & Documentaries
- Phantom Powered
- Selectable 80 Hz Low-Cut Filter
- Low Handling Noise
- High Maximum SPL before Distortion
- Slight Presence Boost
- Windscreen Reduces Wind Noise
- Lightweight Metal Housing
SKU: 09013713,750 EGP -
Rode Audio
Rode VideoMic Pro PLUS Camera-Mount Shotgun Microphone
0 out of 5(0)Acoustic Principle Line Gradient Active Electronics JFET impedance converter Capsule 0.55″ Polar Pattern Address Type End Frequency Range 20Hz – 20kHz (selected HPF @75Hz/150Hz) Output Impedance 200Ω Maximum SPL 133dBSPL Maximum Output Level 7.7dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 14dBA Power Options Weight 122g Dimensions 111mmH x 66mmW x 170mmD Output SKU: 09010722,500 EGP