Related products
-
Rode accessories, Rode Audio
Rode NT2-A Large-diaphragm Condenser Microphone
0 out of 5(0)- For Vocals and Instruments
- Cardioid, Omni & Figure-8 Polar Patterns
- Pad Switch at -5 or -10 dB
- High-Pass Filter at 40 or 80 Hz
- Shockmount Inhibits Vibration Noise
- Large 1″ Gold-Sputtered Diaphragm
- Transformerless Output Stage
- Pop Filter Controls Vocal Plosives
- XLR Cable for Hookup to Mic Preamp
- Operates on 24 or 48 VDC Phantom Power
SKU: 09013129,000 EGP -
Rode Audio
Rode Boompole Metal 3M
0 out of 5(0)Rode’s Boompole provides up to 10′ of extension for shotgun microphones. The pole uses a 3/8″ industry-standard thread and is designed to fit SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic. The five-section pole collapses down to 33″ for easy portability.
- 5 Sections
- Five sections adjust the length of the boom between 33″ and 10′ (84cm – 3 m).
- 3/8″ Thread
- The boom uses an industry-standard 3/8″ thread, and mates with most shockmounts and stands.
- Compatible With…
- SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic.
SKU: 09011912,500 EGP -
Rode Audio
Rode VideoMic GO Lightweight
0 out of 5(0)Acoustic Principle Line Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50″ Polar Pattern Address Type End Frequency Range 100Hz – 16kHz Maximum SPL 120dBSPL Sensitivity -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 34dBA Weight 73.00g Dimensions 79.00mmH x 73.00mmW x 167.00mmD Output SKU: 0901024,250 EGP -
Rode Audio
Rode VideoMic Pro PLUS Camera-Mount Shotgun Microphone
0 out of 5(0)Acoustic Principle Line Gradient Active Electronics JFET impedance converter Capsule 0.55″ Polar Pattern Address Type End Frequency Range 20Hz – 20kHz (selected HPF @75Hz/150Hz) Output Impedance 200Ω Maximum SPL 133dBSPL Maximum Output Level 7.7dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 14dBA Power Options Weight 122g Dimensions 111mmH x 66mmW x 170mmD Output SKU: 09010722,500 EGP -
Rode Audio
Rode Boompole Pro Carbon
0 out of 5(0)The Boompole Pro from Rode is a compact carbon fiber boompole that extends from 2.7′ in length to a full 9.8′, and it is designed for use with professional shotgun microphones. The five carbon fiber sections make it lightweight while maintaining strength, and they are easily extendable with one hand using the intuitive twist-lock mechanism.
SKU: 09011514,500 EGP