Related products
-
Rode Audio
Rode VideoMic Pro Camera-Mount Shotgun Microphone
0 out of 5(0)Form Factor Stand/Boom-Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Electret Condenser
Diaphragm 0.5″ / 12.70 mm
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State (JFET)
Pad None
High-Pass Filter 80 Hz
Tone Adjustment None
Gain Adjustment -10 dB to +20 dB
Indicators 1 x Single LED (Power)
On-Board Controls Gain, High-Pass Filter, On/Off
Windscreen Foam (Included)
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 134 dB SPL
Off-Axis Rejection 2 dB at 60°
18 dB at 120°
10 dB at 180°
Impedance 200 Ohms
Sensitivity -32 dBV/Pa at 1 kHz
Output Level 6.9 dBu (Max)
Dynamic Range 120 dB
Signal-to-Noise Ratio 80 dB
Equivalent Noise Level 14 dB A-WeightedSKU: 09010413,750 EGP -
Rode accessories, Rode Audio
Rode NT2-A Large-diaphragm Condenser Microphone
0 out of 5(0)- For Vocals and Instruments
- Cardioid, Omni & Figure-8 Polar Patterns
- Pad Switch at -5 or -10 dB
- High-Pass Filter at 40 or 80 Hz
- Shockmount Inhibits Vibration Noise
- Large 1″ Gold-Sputtered Diaphragm
- Transformerless Output Stage
- Pop Filter Controls Vocal Plosives
- XLR Cable for Hookup to Mic Preamp
- Operates on 24 or 48 VDC Phantom Power
SKU: 09013129,000 EGP -
Rode Audio
Rode Boompole Metal 3M
0 out of 5(0)Rode’s Boompole provides up to 10′ of extension for shotgun microphones. The pole uses a 3/8″ industry-standard thread and is designed to fit SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic. The five-section pole collapses down to 33″ for easy portability.
- 5 Sections
- Five sections adjust the length of the boom between 33″ and 10′ (84cm – 3 m).
- 3/8″ Thread
- The boom uses an industry-standard 3/8″ thread, and mates with most shockmounts and stands.
- Compatible With…
- SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic.
SKU: 09011912,500 EGP