Dark Light
-10%
,

Rode NTG5 Shotgun Microphone Kit with


  • For Indie Films, TV & Documentaries
  • Lightweight NTG5 Short Shotgun Mic
  • K-Tek Boompole with Internal Cable
  • Shockmount and Furry Windshield
  • Phantom Powered
  • Moisture-Resistant for Humid Conditions
  • Compact, Lightweight Housing

37,135 EGP 41,261 EGP

This Rode NTG5 Shotgun Microphone Kit from B&H allows you to boom the mic with a lightweight K-Tek KE-89CC aluminum boompole, great for capturing high-quality audio when shooting videos, films, or documentaries.

The kit includes a lightweight NTG5 shotgun mic with custom-designed shockmount and furry windshield for vibration and wind protection. The boompole expands from 2′ 5″ to 7′ 6″ and features an internal XLR cable.

  • Rode NTG5 Moisture-Resistant Short Shotgun Microphone

    Shorter and lighter than the NTG3 and with a flatter bass response, the Rode NTG5 moisture-resistant shotgun microphone lets you capture natural, uncolored sound indoors or outside for your next indie film, TV shoot, or documentary project without weighing down your rig.

    Professional-level features such as ultralow-noise circuitry, a smooth off-axis response, and a tightly controlled low end make it ideal for a range of location recording scenarios. Plus, it includes a furry windshield and a pistol grip shockmount that can be attached to a boompole for increased versatility.

    The NTG5’s extremely high sensitivity allows it to produce robust output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG5 delivers acoustic transparency due to its pioneering circular acoustic ports, gentle rise in high frequencies, and rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. RF-bias technology and conformal coating ensure reliable performance even in severe conditions.

    Designed to Withstand Adverse Environmental Conditions
    When your work takes you outdoors, you’re bound to encounter humidity and condensation, which can cause many mics to fail. The NTG5’s RF-bias technology and conformal coating provide excellent resistance to moisture, cold, and dust, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.
    Broadcast-Quality Sound
    The NTG5 was engineered for transparency and all-weather performance. The combination of the NTG5’s 8″ long body, revolutionary circular acoustic ports, and supercardioid polar pattern yields focused on-axis directionality, smooth off-axis response, and a transparent tone with a tightly controlled low end. Its ultralow self-noise of 10 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
    Phantom Powered
    Thanks to its 3-pin XLR output and compliance with 48 VDC phantom power, the NTG5 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. The included short XLR cable—designed for use with the supplied pistol grip—features Neutrik and Switchcraft connectors and an integrated strain-relief junction box.
    Ideal for Handheld Operation or Boompole Mounting
    The NTG5 includes the PG2-R pistol grip shockmount, which impedes the transfer of vibrations to the microphone, and accommodates comfortable handheld operation or placement on a boompole. A mic clip is supplied in case you need to affix the NTG5 to a standard mic stand in a studio.
    Windshield and Windscreen for Reduction of Wind Noise
    The NTG5 has a foam windscreen to reduce unwanted light wind noise from fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, swap the windscreen for the included furry windshield.
  • K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable

    The K-Tek KE-89CC Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. Its sturdy aluminum design is tough enough to endure the rigors of road use, while remaining lightweight and travel-worthy. This pole features an internal coiled cable and an XLR connection at the base of the pole. A total of four aluminum sections telescope between 2′ 5″ to 7′ 6″ and will easily store in any standard equipment case. The captive-collet coupling system locks each section in place for even further reliability.

    Internal coiled XLR cable and connection at the base
    The KE-89CC features a bottom-mounted three-pin XLR connection
    Designed to fit in any standard equipment case, for ENG, EFP, and DV location production work
    Jam-resistant collar coupling
    Unique pole-top design with cable retention slots and replaceable stainless steel mounting stud
SKU: 090113 Categories: ,
  • Rode NTG5 Moisture-Resistant Short Shotgun Microphone
    Microphone
    Form Factor Stand/Boom Mount
    Sound Field Mono
    Operating Principle Line Gradient
    Capsule Condenser
    Polar Pattern Supercardioid
    Orientation End Address
    Circuitry Solid-State
    Pad None
    High-Pass Filter None
    Tone Adjustment None
    Indicators None
    On-Board Controls None
    Windscreen Foam, Windsock/Windjammer (Included)
    Performance
    Frequency Range 20 Hz to 20 kHz
    80 Hz to 20 kHz ±3 dB
    Maximum SPL 130 dB SPL
    Off-Axis Rejection 4 dB at 60°
    20 dB at 120°
    24 dB at 180°
    Impedance 25 Ohms
    Sensitivity -23.5 dBV/Pa at 1 kHz
    Signal-to-Noise Ratio 84 dB
    Equivalent Noise Level 10 dB A-Weighted
    Connectivity
    Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
    Wireless Connectivity None
    Power
    Operating Voltage 48 V
    Operating Current Consumption 2 mA
    Physical
    Color Black
    Mounting Mic Clip, Shockmount (with Included Hardware)
    Construction Material Aluminum
    Dimensions ø: 0.75 x L: 7.99″ / ø: 19 x L: 203 mm (Microphone)
    H: 9.45 x W: 2.36 x L: 4.61″ / H: 240 x W: 60 x L: 117 mm (Mount)
    Weight 2.68 oz / 76 g (Microphone)
    7.9 oz / 224 g (Mount)
    Packaging Info
    Box Dimensions (LxWxH) 9.7 x 9.4 x 3.4″
  • K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable
    Material Aluminum
    Sections 4
    Load Capacity Not specified by manufacturer
    Length 2′ 5″ to 7′ 6″ (0.7 to 2.3 m)
    Weight 1.1 lb (0.5 kg)
    Packaging Info
    Box Dimensions (LxWxH) 33.0 x 2.8 x 1.0″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode NTG5 Shotgun Microphone Kit with”

There are no reviews yet.

SHOPPING CART

close
CLOSE
CLOSE