Dark Light
-10%
,

Rode NT2-A Large-diaphragm Condenser Microphone

Availability:

Out of stock


  • For Vocals and Instruments
  • Cardioid, Omni & Figure-8 Polar Patterns
  • Pad Switch at -5 or -10 dB
  • High-Pass Filter at 40 or 80 Hz
  • Shockmount Inhibits Vibration Noise
  • Large 1″ Gold-Sputtered Diaphragm
  • Transformerless Output Stage
  • Pop Filter Controls Vocal Plosives
  • XLR Cable for Hookup to Mic Preamp
  • Operates on 24 or 48 VDC Phantom Power

26,653 EGP 29,615 EGP

Out of stock

Notify me when the item is back in stock.

Combining a true condenser capsule, three selectable polar patterns, and ultralow-noise circuitry, the Rode NT2-A large-diaphragm studio microphone offers a clear and smooth sonic signature along with versatile pickup responses, making it ideal for all sorts of voice and instrument sources at home or in the studio. Plus, its bundle of accessories—shockmount, pop filter, XLR cable, and dust cover—help the NT2-A serve vocalists, rappers, and voice-over artists especially well.

With low noise being a top priority of the NT2-A, its 1″ gold-sputtered capsule is internally shock-mounted to further isolate it from handling and vibration noise. Enhancing its professional character are the onboard pad (-5 or -10 dB) and high-pass filter (40 or 80 Hz) settings, which help avoid distortion and bass builup. Since it can run on 24 or 48 VDC phantom power, the NT2-A can be used with a variety of professional and entry-level XLR mic preamps.

Large-Diaphragm True Condenser

This true condenser (externally biased) features a 1″ gold-sputtered diaphragm that provides a broad frequency response, wide dynamic range, and excellent signal-to-noise ratio.

Three Polar Patterns

With three polar patterns selectable on the mic, the NT2-A offers excellent versatility for single-source close miking (cardioid recommended), dual-source pickup (figure-8 recommended), and room ambience capture (omnidirectional recommended).

Special Voicing

The frequency and transient response of this transducer has been voiced to complement today’s recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the ’50s and ’60s.

Transformerless Output

The transformerless JFET output electronics result in an ultralow-noise output (just 7 dBA) while maintaining maximum signal gain.

48V Phantom Power

The NT2-A operates reliably on 24 or 48 VDC phantom power, which can be supplied via most XLR-connected mic preamps, mixer channels, or audio interfaces.

Accessory Package

The accessory package includes a studio-grade shockmount with an integrated pop filter, a premium 20′ XLR mic cable, a dust cover, and a downloadable instructional video packed with recording tips.

Features at a Glance

  • True condenser (externally biased)
  • Large 1″ HF1 capsule with gold-sputtered diaphragm
  • Cardioid, figure-8, and omnidirectional polar patterns
  • Self-noise of only 7 dBA
  • Transformerless JFET active circuitry
  • Wide dynamic range
  • XLR 3-pin output connector
  • Runs on phantom power
  • Internally shock-mounted capsule
  • Includes SM6 shockmount, pop filter, and dust cover
SKU: 090131 Categories: ,

Rode NT2A Specs

Microphone
Primary Applications Studio Recording
Form Factor Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources Vocals, Speech/Voice Over, Instrument
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 1″ / 25.40 mm
Polar Pattern Cardioid, Figure-8, Omnidirectional
Pattern Selection Switched (Adjustable on Mic)
Orientation Side Address
Circuitry Solid-State (JFET)
Pad -5 dB
-10 dB
High-Pass Filter 40 Hz
80 Hz
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls High-Pass Filter, Pad, Polar Pattern
Windscreen None
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 147 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
157 dB SPL (1 kHz, 1% THD, 1-Kilohm Load, with Pad)
Impedance 200 Ohms
Sensitivity -36 dBV/Pa at 1 kHz
Output Level 16 mV (Max, 1 kHz)
Dynamic Range 140 dB
Signal-to-Noise Ratio 87 dB A-Weighted
Equivalent Noise Level 7 dB SPL A-Weighted
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None
Cable Length 20′ / 6.1 m
Power
Bus Power None
Operating Voltage 24 V (Phantom Power)
48 V (Phantom Power)
Physical
Color Silver
Mounting Shockmount (Included)
Included Case Mic Sock
Included Filters Pop Filter
Dimensions ø: 2.2 x L: 8.2″ / ø: 55 x L: 209 mm
Weight 1.9 lb / 0.86 kg
Packaging Info
Package Weight 5.445 lb
Box Dimensions (LxWxH) 15.4 x 10.7 x 5.1″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Rode NT2-A Large-diaphragm Condenser Microphone”

There are no reviews yet.

SHOPPING CART

close
CLOSE
CLOSE