LS2 ? Lightweight Speaker Stands
Samson’s LS2 Lightweight Speaker Stands raise your music to where audiences can enjoy it to the fullest. The pair of lightweight, telescoping tripod speaker stands features a roadworthy, steel-constructed design with a sleek black finish. With their standard 1 3/8-inch pole adapters, the LS2s fit virtually all PA speakers. Adjustable up to six feet in height, each stand can handle enclosures that weigh up to 55 pounds (25kg).
4,326 EGP
Related products
-
Samson Audio, Samson Speakers / PA Systems, Speakers / PA Cabinets
Samson Resolv SE8
0 out of 5(0)- 2-way active studio reference monitor with ported tuned enclosure (sold individually)
- 100 watts of power
- 8-inch woven carbon fiber woofer
- 1.25-inch soft dome tweeter with neodymium magnet
- 40Hz-27kHz frequency response
- Active crossover with multi-pole design for linear response
- 4-position high frequency lift control
- Balanced 1/4-inch inputs, unbalanced RCA inputs
- AV shielded for use with sensitive electronics
- Solid MDF (Medium Density Fiberboard) construction
SKU: 07030515,000 EGP -
Samson Audio, Samson Speakers / PA Systems, Speakers / PA Cabinets
Samson ?Auro D1500
0 out of 5(0)- Lightweight, compact Class D active subwoofer, weighing just over 50lb
- 15″ long excursion low frequency driver
- 2.5″ voice coil
- 1,000 watts of output power
- Balanced XLR-1/4″ combo inputs
- Unbalanced stereo RCA inputs
- Stereo XLR high pass filter outputs
- Additional parallel full range XLR outputs
- Signal, Limiter and Protect LED indicators
- Variable low pass filter control (balance control when used with high pass outputs)
- 3-position (Normal, Deep, Boost) DSP contour control
- Polarity switch
- Solid 5/8″ plywood enclosure with textured paint finish
- Integrated 1 3/8″ pole mount receptacle
- Two large ergonomic carry handles
SKU: 07050140,000 EGP -
Samson Audio, Wireless Systems
Samson AirLine Guitar AF1
0 out of 5(0)AF1/AG1 Transmitters feature:
- Standard 1/4-inch plug
- Power/Battery LED
- Power switch
- 15dB pad switch
- Operate on single AAA battery
AP1 Pedal Receiver:
- Power switch and level control
- Power On/Low Battery LED indicators as well as TX/Peak LEDs
- Dual swivel mounting antennas for optimum positioning
- 1/4-inch unbalanced output jack
- DC input
- Squelch control
Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.SKU: 07010114,000 EGP -
Samson Audio, Wireless Systems
Samson Concert 88 Camera LM10
0 out of 5(0)- For HD Camcorders and DSLR Cameras
- 16 Selectable Frequencies
- CR88V Micro Wireless Receiver
- CB88 Beltpack Transmitter & LM10 Mic
- 1/8″ Output with Level Control
- 1/8″ Headphone Monitor Output
- 2 x Rechargeable Batteries Included
- Includes Belt Clip & Shoe-Mount Adapter
- Protective Carry Case
Wireless System Working Range 300′ (100 m) line-of-sight Channel Assignment D Dynamic Range > 100 dB A-weighted Signal to Noise > 90 dB Wireless Receiver Audio Output Level +9 dBu Audio Output Impedance 1 kOhms Headphone Output Impedance 16 ohms Microphone Lavalier LM10 Beltpack Transmitter Input Impedance 1 mOhms RF Power 10 mW EIRP Battery Life 8 hours from 2 x AA batteries Dimensions Not specified by manufacturer Weight Not specified by manufacturer Packaging Info Package Weight 2.4 lb Box Dimensions (LxWxH) 12.6 x 7.6 x 3.5″ SKU: 07010820,750 EGP -
Mixers, Samson Audio
Samson MD1 Pro
0 out of 5(0)- All-metal, impact resistant design
- Samson STLX Mu-Metal shielded transformer
- 3-position 0dB/-15dB/-30dB attenuation switch
- Ground Lift switch
- 1/4″ Input and Thru
- Balanced XLR output
- No Phantom or Battery power required
- Frequency response of 18Hz–40kHz
SKU: 0708014,500 EGP